Peripherals

In the Domat Control System product range there are especially input peripherals, which are senosrs, thermostats, and manostats. The most important items in the product range are temperature sensors, namely room sensors, pocket sensors and air duct sensors. They are supplied in length of 100 to 400 mm both with different passive measuring elements, and as active sensors (0…10 V, 4…20 mA output). Globe and semiglobe sensors, which measure also the radiating part, are perfect for applications with radiating panels or infrared panels. Average temperature sensors, showcase humidity and temperature sensors, and ceiling sensors are designed for special usage. Other room and duct sensors measure relative humidity, CO2 and VOC concentration, and other environmental parameters. PREM-1110-Display__tyr1_maxi-mL_4cWe also supply air pressure sensors with configurable range, air velocity sensors, and water pressure sensors (also differential sensors for pump operation monitoring or distributor pressure control). The sensors offer an LCD display as option. Room units are also available as anti-vandal or with customized prints.

PREM-1110-Display__tyr1_maxi-mL_4c

 

Differential pressure sensor with LCD display

Other frequently used sensors are indoor and outdoor light and presence sensors. Domat also offers communicative sensors (Modbus over RS485), which may save cabling and I/O modules costs thanks to their bus topology. There are also thermostats, humidity and pressure switching sensors, and dew point sensors in the range. Dew point control is an issue at chilled ceilings and panels.

All sensors provide standard electrical interfaces, such as passive temperature measuring elements, 0…10 V and 0(4)…20 mA signals, or dry contacts, and they can be used with any control system. The measuring ranges are ususally set by DIP switches, and they can be adapted to local requirements.

When refurbishing a control system, it is usually possible to use the original sensors with Domat controllers. The Domat input modules provide configurable ranges for passive sensors:

  • Pt100
  • Pt500
  • Pt1000
  • Ni1000-5000 (Landis & Gyr)
  • Ni1000-6180 (Sauter)
  • T1 (Staefa)
  • any passive sensor in the 0…5000 Ohm range

Details are in the respective product data sheets. Please respect the general sensor placement rules when designing.