Non-standard range for UT090 temperature measurement

Several UT090 sensors have been put on market, which have a non-standard set temperature range for temperature measurement, namely -25 – 60°C instead of the usual 0 – 50°C. The sensors can be used, it is only necessary to change the range for reading values in the Merbon IDE environment in order to display the correct values of the measured temperature.

These are the following S / N:
193371, 188707, 187080, 193370, 188706, 187079, 193368, 188705, 187078, 193363, 188704, 187077, 193361, 188703, 187076, 193360, 188700, 187074, 193269, 188699, 187073, 192504, 188697, 187072, 192503 188696, 187061, 192502, 188694, 187060, 192501, 188693, 187059, 192500, 188692, 187058, 192489, 188677, 187057, 192488, 188668, 187056, 188755, 188662, 187055, 188752, 188661, 187054, 188748, 188659, 188748, 18865 187053, 188742, 187081, 187052, 188681, 193372 a 187253.

If you have any questions, please contact our technical support:

We apologize for any inconvenience.

Domat Control System Team