Merbon Visual
Merbon Visual – Touch Control Panel HT200
Update from version 2.3.0.3 and newer:
HT200 – touch control panel version 2.4.0.14 (HT200.sh)
Before uploading the update file to the terminal, unzip the downloaded file with the .rar extension and upload the already unzipped file named HT200.sh to the terminal.
Merbon Visual – configuration guide and instructions for setting up the touch control panel
Firmware upgrade instruction:
Please, do not switch off power supply during firmware upgrade.
It is possible to upload new version of HT200 application from web browser on the device IP address (the browser PC must be in the same network). To access the service web, enter the password. In section Device management -> New application and web on device choose file „HT200.sh“ (file name must be „HT200.sh“). HT200 will be restarted automatically.
Update from versions older than 2.3.0.3:
HT200 –Touch screen operator unit version 2.4.0.14 (HT200.sh)
Web Upgrade (web_2.0.1_Upgrade.tar.gz)
Firmware upgrade instruction:
Please, do not switch off power supply during firmware upgrade.
It is possible to upload new version of HT200 application from web browser on the device IP address (the browser PC must be in the same network). To access the service web, enter the password. In section Device management -> New application and web on device choose file „WEB_Upgrade.tar.gz“. HT200 needs to be restarted after this upgrade and the browser needs to be closed and opened again as well. Upgraded web can be found on the IP address of the HT200. This web can be used only to upload „HT200.sh“ file. Device will restart itself after this upgrade. The webpage should be refreshed automatically.
Merbon Visual – Mobile App
The mobile version of Merbon Visual is free to download on Google Play and the App store:
Merbon Visual – Configuration guide and installation instructions and mobile applications
Merbon Visual – iPC Industrial Computer
Merbon Visual – iPC (32,5 MB) – 15/9/2020
Merbon Visual – Configuration guide and installation instructions industrial computers
The installer includes the Merbon Visual application for industrial iPCs with the Windows operating system for visualizing the user interface. The application is fully compatible with PLCs with both Merbon RT and SoftPLC RT.