This training will be focused on new development tool Merbon IDE. In the first part of this training will be discussed the main differences between Merbon IDE and older tool, SoftPLC IDE. Next part is prepared to ensure that participant will be taught to build his own solution, work with functions and function blocks, comunicate with I/O modules, use debug tool and make LCD menu and web access. The last part is made for deeper understanding of Merbon IDE.
Date: 24th September 2015
9:00 – 10:00 Introduction of new development enviroment Merbon IDE, presentation of main differences between Merbon IDE and SoftPLC IDE, installation of Merbon IDE
10:10 – 11:30 Working with Merbon IDE from the point of view of programmer – Solution build, working with functions/function blocks, working with user function blocks, I/O modules settings
11:40 – 12:40 Working with Merbon IDE from the point of view of worker on site – Solution deploy, I/O settings upload, debug
13:30 – 15:00 Advanced functions of Merbon IDE, working in full mode
15:10 – 16:00 LCD menu, web access
16:00 – 17:00 Discussion
Schedule can be changed on participant’s demands and their experience with SoftPLC IDE.
Please, bring Your own notebooks with Ethernet interface, OS Windows Vista Service Pack 2 or newer (Win7, Win8, Win8.1, Win10). It is also necessary to have .Net 4.5 or newer installed.
Make sure, that You have administrator acces to your Windows system and set Your IP address in the range of 192.168.1.x.
Training is in czech language.